A power drill mixer can be helpful to mix product faster. Aluminum pigment and fibers will settle to the bottom, so a thorough mixing is necessary to re-disperse these components prior to use.
Stir contents well, before and during use as required. When applying this product to a previously coated asphalt surface, allow the surface to cure fully before applying. Look for specific patching instructions on the repair patch container. Repair all leaks and problem areas with Leak Stopper Roof Patch and reinforce with fabric. Surface temperatures should be a minimum of 60☏ and rising, not to exceed 110☏. Standing water dulls aluminum, and may cause adhesion failure between the coating and substrate. Dries to an aluminum/silver colored finish, and is water clean-up.This product is not recommended for use on wood, asphalt shingles or dead flat roofs with slopes less than 5 degrees (or 1/8' per ft.).
Periodic application of this product is recommended to maintain and prolong the life of your roof. Apply across the surface of the roof to form a layer of protection that helps reflect the sun’s rays. Aluma-Kote™ Fibered Aluminum Roof Coating is an economy fibered, reflective aluminum roof coating that protects and renews worn roof surfaces.
